Boiler of type Westfalia Holtzgas on first throw of the uninitiated eye does not differ from the usual boiler on the wood. It has hearth, loading chamber and ash-pan. The difference of working is however considerable -- it burns in it not from the bottom to the top, but inversely. There is the loading chamber at the top and the transformation of the wood follows in the wood gas in this chamber. There is the nozzle below the chamber in which burning the wood gas mixed previously with the air, which flows in from outside, follows. This element is made from the heat-proof material. There is the ash-pan, in which burning down the mixture of the wood gas with the air follows, under the nozzle. The boiler on the wood gas from the back possesses accompanying flue gas to the chimney, in this place the exchanger of warmth allowing to the heating of water from hot flue gas is assembled.
The boilers of type Westfalia Holtzgas are designed to heating up water in c. h. installations which computational temperature of supply do not cross 85 °C. They can be used in c. h. installations of flat, council or productive buildings, which users require automatic feeding of fuel. Boilers can be assembled both in modern and conventional heating installations.
Boiler steering has the possibility of pump regulation also loading storage tank.
Boiler of type Westfalia Holtzgas utilizes wood in gasification process using energy contained in wood with efficiency three times higher than traditional boilers. Smoke and other emissions are cut to a very low level, making our boilers nature friendly.

·        Low exploitation cost

·        Easy and simple service

·        Efficiency 91 %

·        Fuel loadings - once for 8 -12 hours

·        Boiler power modulation 40÷100 %

·        Small ash quantity

·        Electronic regulator with temperature sensor built in

·        Nature friendly

·        Produced of steel